Author Topic: Noob - What's the diff between genboard v 3.3 and assembled v3.3 controller (Read 3941 times)

ultrasmurf · « **on:** November 22, 2008, 12:15:27 pm »

First post,

As per title, I dont quite get what's the diff ? I'm cheap and 200 euro is a big jump. From the description I just need to solder some FET, IGBT and I get a working EMS ?

I'm planning to FI my KTM EXC400, anyone manage to do FI on a thumper before using VEMS ?

Regards,
Leonard

gunni · « **Reply #1 on:** November 22, 2008, 06:21:13 pm »

When all is counted buying everything for a unassembled vems vs. buying a assembled one is very little,
infact the time it will take you to assemble it would be better spent working for the money to pay vems to assemble it.

Bat · « **Reply #2 on:** November 23, 2008, 10:29:32 pm »

Hi,
True, but you'll need the PCB plugs, a case, FET clamps, etc. Also the build guide isn't exactly fantastic either!
If I were to do it again I would go ready built every time!
Cheers,
Gavin

News:

Author Topic: Noob - What's the diff between genboard v 3.3 and assembled v3.3 controller (Read 3941 times)

ultrasmurf

Noob - What's the diff between genboard v 3.3 and assembled v3.3 controller

gunni

Re: Noob - What's the diff between genboard v 3.3 and assembled v3.3 controller

Bat

Re: Noob - What's the diff between genboard v 3.3 and assembled v3.3 controller