Author Topic: lambda calibration  (Read 7722 times)

Offline Seight-v8

  • Sr. Member
  • ****
  • Posts: 339
  • BHP: 6
    • Members Page - Scott Richmond
lambda calibration
« on: June 30, 2018, 09:26:42 am »
hello all,

Just checking a few things before getting my engine running after 3 years in peices.

Checking the lambda sensors under "lambda calibration" in the vemtune shows this on both first & second sensors

https://vgy.me/IBN9Ld.mp4

Does this look like a broken sensor or a vems problem?

Sensors are heating, just reading very erratic, weird how its both banks doing the same (v8 engine).

cheers

scott
Engine:Rover V8 4600cc
Vems Firmware:V1.2.38, GPS, SDcard, LCD & Dual lambdas, Wasted spark, 36-1 trigger, Cam Sync & Bluetooth serial.

http://www.vems.hu/wiki/index.php?page=MembersPage%2FScottRichmond