When Cranking , crank state remains off, RPM 0. Triggers seem to work.

[rico_pl]

Hi, I have an Escort Cosworth with a custom wiring loom. (no documentation....)
I created a trigger file and I see signals. But the cranking state remains off ?

Trigger is set to "Lancia_cosworth".
What could cause this ? Weak signal ? Alarm system ?

VT 1.5.55
Firmware 1.2.11

Thanks a lot for any hints. How to upload files ?
Rico

[jrussell]

Probably wrong trigger settings if you're getting proper signals from trigger file.

To share config/logs/triggerlogs the easiest way is to use the help menu on VemsTune and submit a sharing center report. Then paste the URL here.