« previous next »
Pages: [1]

Author Topic: Noob - What's the diff between genboard v 3.3 and assembled v3.3 controller  (Read 3940 times)

Offline ultrasmurf

  • New Users
  • *
  • Posts: 1
  • BHP: 0
Noob - What's the diff between genboard v 3.3 and assembled v3.3 controller
« on: November 22, 2008, 12:15:27 pm »
First post,

As per title, I dont quite get what's the diff ? I'm cheap and 200 euro is a big jump. From the description I just need to solder some FET, IGBT and I get a working EMS ? 

I'm planning to FI my KTM EXC400, anyone manage to do FI on a thumper before using VEMS ?

Regards,
Leonard
Logged

Offline gunni

  • Hero Member
  • *****
  • Posts: 1492
  • BHP: 37
Re: Noob - What's the diff between genboard v 3.3 and assembled v3.3 controller
« Reply #1 on: November 22, 2008, 06:21:13 pm »
When all is counted buying everything for a unassembled vems vs. buying a assembled one is very little,
infact the time it will take you to assemble it would be better spent working for the money to pay vems to assemble it.

Logged

Offline Bat

  • Full Member
  • ***
  • Posts: 169
  • BHP: 8
    • Trucking site
Re: Noob - What's the diff between genboard v 3.3 and assembled v3.3 controller
« Reply #2 on: November 23, 2008, 10:29:32 pm »
Hi,
True, but you'll need the PCB plugs, a case, FET clamps, etc. Also the build guide isn't exactly fantastic either!
If I were to do it again I would go ready built every time!
Cheers,
Gavin :)
Logged
VEMs Authorised Installer / Re-seller. K head kits for A series now available!

WB/EGT gauges. Click here for customers write-up 

Visit www.doyouneedabrain.co.uk
Pages: [1]
« previous next »