Author Topic: Knock senzor configuration  (Read 20499 times)

Offline Sprocket

  • Hero Member
  • *****
  • Posts: 867
  • BHP: 29
Re: Knock senzor configuration
« Reply #15 on: March 23, 2008, 06:55:48 pm »
Just a little more on this.

In Knock Control action, what is the ' Threshold' and the 'Noise Scale Factor'

I have  values of 255 in both these. I know they may well be specific to the engine, but any ideas on a start point?

Ive set vems.ini to log

knock_cyl_0_knock_val,   "knockvalue", int, "%d"   
knock_cyl_0_noise_val,   "knocknoise", int, "%d"
« Last Edit: March 23, 2008, 07:01:53 pm by Sprocket »

Offline Sprocket

  • Hero Member
  • *****
  • Posts: 867
  • BHP: 29
Re: Knock senzor configuration
« Reply #16 on: October 25, 2008, 09:46:23 pm »
Bump

Just need a figure to get started with, I have no idea what these values are for :-\

Just a little more on this.

In Knock Control action, what is the ' Threshold' and the 'Noise Scale Factor'

I have  values of 255 in both these. I know they may well be specific to the engine, but any ideas on a start point?


Offline rob@vems.co.uk

  • Hero Member
  • *****
  • Posts: 3115
  • BHP: 49
    • VEMS Forum
Re: Knock senzor configuration
« Reply #17 on: October 26, 2008, 04:57:41 pm »
Does it now differ from the Knock sensor section in:
http://www.vems.hu/wiki/index.php?page=MembersPage/PhatBob/UserGuide
If so we'll have to find a new and interesting way of testing...

Rob

Offline Sprocket

  • Hero Member
  • *****
  • Posts: 867
  • BHP: 29
Re: Knock senzor configuration
« Reply #18 on: October 26, 2008, 08:22:23 pm »
 :-[

Its been a while since i looked over the whole of your guide, Rob :D

Offline rob@vems.co.uk

  • Hero Member
  • *****
  • Posts: 3115
  • BHP: 49
    • VEMS Forum
Re: Knock senzor configuration
« Reply #19 on: October 26, 2008, 08:40:33 pm »
It is my Magnum Opus, and defines my existence ;D