Author Topic: Acceleration enLEANment?  (Read 6092 times)

Offline Grant

  • Jr. Member
  • **
  • Posts: 95
  • BHP: 2
Acceleration enLEANment?
« on: February 04, 2010, 02:51:35 pm »
The Megasquirt guys have seen some 10-20% fuel economy increase around town with acceleration enleanment. I don't see this to be an option on 1.1.44alpha, that otherwise works pretty well.

Are there any other firmware versions that support acceleration enleanment?  I think I could really use it, my AFR goes really rich when lifting off the throttle at a medium to quick pace.

Sorry if this has been covered before, I've asked this before in another thread with no response.

Thanks!

Offline lost

  • Sr. Member
  • ****
  • Posts: 325
  • BHP: 2
Re: Acceleration enLEANment?
« Reply #1 on: February 04, 2010, 04:19:11 pm »
That would be nice feature  ;)

Offline MWfire

  • Hero Member
  • *****
  • Posts: 721
  • BHP: 35
Re: Acceleration enLEANment?
« Reply #2 on: February 04, 2010, 04:35:22 pm »
1.1.6x has that option.

Offline Grant

  • Jr. Member
  • **
  • Posts: 95
  • BHP: 2
Re: Acceleration enLEANment?
« Reply #3 on: February 05, 2010, 04:24:25 am »
Would I be giving up anything important switching to that feature?  Excuse my ignorance, but would that require switching to VT or do I use MT for that firmware?  This car is my daily driver and I have to do updates quickly. 

Offline jrussell

  • VEMS USA
  • Administrator
  • Full Member
  • *****
  • Posts: 224
  • BHP: 15
    • VEMS USA
Re: Acceleration enLEANment?
« Reply #4 on: February 05, 2010, 11:20:47 am »
Wait for a month or two for the official release. The current (1.1.6x) releases are for development and testing, not meant for widespread use.
VEMS USA - Located in beautiful Burlington, Vermont
1988 RX7 Turbo