« previous next »
Pages: [1]

Author Topic: Driftworks 1JZ R32  (Read 7724 times)

Offline rob@vems.co.uk

  • Hero Member
  • *****
  • Posts: 3115
  • BHP: 49
    • VEMS Forum
Driftworks 1JZ R32
« on: April 20, 2009, 08:15:09 pm »
Standard 1JZ-GTE
HKS 264 cams with adjustable pulleys
Brian Crower springs and titanium retainers (8500rpm rev limit)
Sard 850cc injectors
3076 turbo
Big capacity inlet manifold with 80mm throttle body
Massive FMIC
Massive exhaust
VEMS management
Exedy Twin plate clutch
R154 gearbox

547bhp and 555ft/lb Redline 8500rpm


http://www.vimeo.com/4196370
« Last Edit: May 01, 2009, 02:05:43 pm by rob@vems.co.uk »
Logged

Offline royal

  • Jr. Member
  • **
  • Posts: 32
  • BHP: 1
Re: Driftworks 1JZ R32
« Reply #1 on: May 01, 2009, 10:09:13 pm »
More tech info needed Rob :D

Saw this at Donnington the other day and it was awesome.
Logged

Offline irishtwincam

  • Full Member
  • ***
  • Posts: 199
  • BHP: 9
Re: Driftworks 1JZ R32
« Reply #2 on: June 17, 2009, 02:45:54 pm »
So what trigger did this use in the end?
Logged

Offline rob@vems.co.uk

  • Hero Member
  • *****
  • Posts: 3115
  • BHP: 49
    • VEMS Forum
Re: Driftworks 1JZ R32
« Reply #3 on: June 17, 2009, 02:51:10 pm »
36-1
Logged
Pages: [1]
« previous next »