Impreza newagde Vems frontplate

[Denmark]

I have just made this, for the weekends Vems challenge ;)





This is for a bugeye WRX..



/Skassa

[Denmark]

And then.. :)

[gunni]

What does the wiring look on the inside?

[Denmark]

The Wiring is just made as short as possible, and then it goes to the print, like the Vems AMP connector would have done..
The wires is then glued, when the print is all tested in the car


I will take a pic when i have made the final wires,


/Skassa

[Denmark]

this is before the hotmelt





Just another impreza Vems made, going in a car tomorrow :)


/Skassa