Author Topic: subaru 36-2-2-2 trigger  (Read 8543 times)

Offline Denmark

  • Hero Member
  • *****
  • Posts: 542
  • BHP: 7
subaru 36-2-2-2 trigger
« on: August 29, 2008, 08:41:41 am »
Hi All,

Anyone know of someone running this with the vems?,
if not , do You think it´s durable?

The crank triggerwheel is a 36-2-2-2.




I need this for a new Impreza Vems order, this it for the 2001- WRX model
Were the custumer just have paid around 1000£ to get the car Ecutek mapped, that is including the long travel, as no one in Denmark can do it.
So this is great that he now chooses a Vems to be installed, by me
this is a 2,5ltr Impreza, with forged internals,6speed ,TD06-20G turbo, so this will be a "okay" fast dailydriver.


Thanks,
Skassa
« Last Edit: August 29, 2008, 09:47:04 am by Denmark »
working on the boxer

Offline dnb

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 837
  • BHP: 19
Re: subaru 36-2-2-2 trigger
« Reply #1 on: August 29, 2008, 09:44:14 pm »
Very similar spec to the one I'm doing, apart from the trigger...

I don't see why it won't work - it should be better than the original 6 tooth thing (which I have working during cranking, but no fuel pump installed, so no running yet) because of the shorter gaps producing more signal

Offline Denmark

  • Hero Member
  • *****
  • Posts: 542
  • BHP: 7
Re: subaru 36-2-2-2 trigger
« Reply #2 on: September 01, 2008, 08:45:57 am »
Yep,
I hope that the trigger setup can work,
The problem is i dont know how to make the trigger config, to make it work ???

I need the numbers to punch in, or someone who can explain in understandeble words, how to configure it ;)

I have just ordered some ecu plugs for the 2001-


Thanks,
Skassa
working on the boxer

Offline rob@vems.co.uk

  • Hero Member
  • *****
  • Posts: 3115
  • BHP: 49
    • VEMS Forum
Re: subaru 36-2-2-2 trigger
« Reply #3 on: September 01, 2008, 08:56:31 am »
I'm not sure that this will work with the current triggering code :(
I wouldnt know where to start with the trigger settings for that.

Offline Bat

  • Full Member
  • ***
  • Posts: 169
  • BHP: 8
    • Trucking site
Re: subaru 36-2-2-2 trigger
« Reply #4 on: September 06, 2008, 08:10:46 am »
Hi,
I'm running a trigger with four odd spaced missing teeth, but I think the large gaps will be the problem though :(
Cheers,
Gavin
VEMs Authorised Installer / Re-seller. K head kits for A series now available!

WB/EGT gauges. Click here for customers write-up 

Visit www.doyouneedabrain.co.uk

Offline Denmark

  • Hero Member
  • *****
  • Posts: 542
  • BHP: 7
Re: subaru 36-2-2-2 trigger
« Reply #5 on: September 13, 2008, 07:01:29 pm »
Do any of you know, if it can be run of the crankwheel alone, so i can run wastedspark ,and not use the cam sync.

And can someone please let me know how to set it up?.

As i´m going to install a Vems next weekend to a newagde Impreza, it could save me the time to change the trigger wheel, if this could work  :)


/Skassa
working on the boxer