News:

When asking for technical help at the very least let us know the version of firmware you are running.
Cliff's Calibration (Mapping) Guide is a MUST READ: http://www.vemssupport.com/forum/index.php/topic,97.0.html

Main Menu

Creating a custom gauge in Megatune

Started by gunni, April 28, 2009, 02:43:22 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

gunni

April 28, 2009, 02:43:22 AM
I have a 0-400kpa map sensor I need to log in megatune,
while it would work to just log voltages it would be nice to convert the voltages into Kpa values for easy comparison against the internal map sensor.

Where and how do I convert the voltages into Kpa values.

Thanks
Print
Go Up Pages1
User actions