News:

When asking for technical help at the very least let us know the version of firmware you are running.
Cliff's Calibration (Mapping) Guide is a MUST READ: http://www.vemssupport.com/forum/index.php/topic,97.0.html

Main Menu

Temp sensor calibration (Bosch CLT & GM MAT)

Started by M-Tech, August 12, 2008, 10:45:23 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

M-Tech

August 12, 2008, 10:45:23 PM
What temp sensor factor should I use if i've got Bosch NTC Coolant sensor and GM NTC air temp sensor?

The Bosch reads as:
-20C = 15 426 ohm
25C = 2057 ohm
100C = 187 ohm

GM reads as:
-20C = 28 146 ohm
25C = 2752 ohm
100C = 175 ohm

[email protected]

#1
August 12, 2008, 10:56:51 PM
Bosch I'd use 2063_255 and GM I'd go for 2700_255
Print
Go Up Pages1
User actions