« previous next »
Pages: [1]

Author Topic: Mounting EGT on KKK16 turbo with integrated collector  (Read 8685 times)

Offline mr_g

  • Full Member
  • ***
  • Posts: 205
  • BHP: 9
Mounting EGT on KKK16 turbo with integrated collector
« on: August 13, 2008, 08:48:20 am »
KKK16 has integrated exhaust collector in to the turbine housing... So it's pretty obvious I cannot drill in it... It's too small and too risky that could result with buying another turbine...

I have bigger EGT (thick one) from VEMS shop...

The picture isn't so clear...



Logged

Offline rob@vems.co.uk

  • Hero Member
  • *****
  • Posts: 3115
  • BHP: 49
    • VEMS Forum
Re: Mounting EGT on KKK16 turbo with integrated collector
« Reply #1 on: August 13, 2008, 10:11:46 am »
I'd put the hole in at the point where the wastegate T's off from the housing.  After pulling the turbo out of the turbine housing of course.
Logged

Offline mr_g

  • Full Member
  • ***
  • Posts: 205
  • BHP: 9
Re: Mounting EGT on KKK16 turbo with integrated collector
« Reply #2 on: August 13, 2008, 10:40:48 am »
Can you mark it on the picture?
Logged
Pages: [1]
« previous next »