another 325i turbo I installed VEMS on

[gunni]

ItÃ,´s running the exact same setup as the red one.
apart from running a 4,1 or a 3,91 diff, which doesnÃ,´t suit AT ALL now.

ItÃ,´s having some leak problems and will be sorted soon, itÃ,´s running 0,7bar at the moment.
Will recieve the same level as the red car when itÃ,´s sorted using boost control.

some pics, itÃ,´s HOT!!






Welded coolant channels










Me installing VEMS


HeÃ,´s replacing the HX35 for a HX30 as his desired power level is not that high and he favours
low end boost.

[Turbos10]

Why not replace with an HY35W?  The 9cm turbine housing would spool lightning fast and still have the higher capability of the larger compressor.

[gunni]

He got a HX30 for $200 so hard to say now.

We also donÃ,´t have junkyards with these in so itÃ,´s all ebay bought anyway.

[gox]

Want to share Ignition Table? :)

[gunni]

http://www.e30tech.com/forum/showthread.php?t=33028

You should definitely take a look at that forum.
It is the one stop for information about E30 turboing.

[[email protected]]

IXer's big-up for the forum is handy, external links boost the google ranking.

[gox]

http://www.e30tech.com/forum/showthread.php?t=33028

You should definitely take a look at that forum.
It is the one stop for information about E30 turboing.

hehe i know ;) my nickanem overthere is Soopa ;)
i still have problems with knock,i dont know what to do...i`m a little skeptic about retarding the ignition more and more :( i started it with iXer's map and it starded detonating at 150kpa and above in higher gears,i retarded it a 4deg and its still detonating.... :(

[gunni]

Post your map and post your base timing config.
into a new thread. IÃ,´ll try and give you my opinion.

[gox]

Its in my thread
http://www.vems.co.uk/forum/index.php?topic=225.45

tnx