AIM

[SILBEAM]

 HI WILL THE AIM Sports MXL dash display WORK WITH VEMS THANKS

[rob@vems.co.uk]

A couple of us wrote the AiM protocol to work with the VEMS firmware, there is no sign of it being used on any of the firmware releases...
Most of the AiM functions can be provided by the analog sensors.

[SILBEAM]

THANKS I WAS TRYING TO WIREING TO A MINN  WHERE CAN I GET THE VEMS ECU SET UP FOR CA18DET AND CAN I RUN WASTED SPARK OFF THE CAM TRIGGER OR DO I NEED THE VEMS CAM DISC SO IT CAN WORK

[rob@vems.co.uk]

You'll need the timing disk for the CA, and the setup for the is readily available.
Where are you based?

[SILBEAM]

IN THE NORTH WEST (LANCASTER) ,A FREIND USES MAGATUNE WITH MEGAQUIRT IS IT THE SAME SOFTWARE ,WHAT I`M AFTER IS VEMS WITH A BASE MAP FOR STD ENGINE BUT I`LL HARD WIRE IT AS ITS GOING IN A SUNBEAM .I LOOKED AT THE ONE APEX IS SELLING BUT THE PRICE HAS GONE UP IN THE LAST MONTH  OR SO AND NOT SELLING THE PARTS SEPARET 

[rob@vems.co.uk]

Apex do the plug-and-play systems which isn't what you need TBH.
The prices have been shooting up recently as the Pound tanks against the Euro

The wiring is best done using a V3 harness as I've drawn up here:
http://www.vems.co.uk/forum/index.php?topic=397.0

With the base Nissan setup your friend should be easily able to help you with the mapping.  The tuning software is the same, although the VEMS firmware is different so there are a few new elements to learn.

PS can you turn caps lock off when typing, it makes your posts difficult to read.