Old Genboard Project - Turbocharged V8 Chevy

[Turbos10]

As requested, I am posting about my project.  I built the truck starting in 2002 and first ran it on Genboard 2.2 in 2005....best I remember.  I swapped to V3 when it came out in late 2006.  I had engine problems for months and ended up parking the truck for two years to pursue other projects.  I have the truck back together and Genboard is out for a small repair and check over by VEMS tech team USA(thanks Jason ;))

The truck is a 1983 S-10 chevy purpose built for drag racing.....Goal was single digit 1/4 mile times with pump gas.

Engine is a 410cid V8 Chevrolet:

-8.5:1 CR, all forged rotating assembly
-Dart Pro 1 230cc Heads,
-Edelbrock proflo intake and air valve
-50lb injectors - dummy sequential fire
-Mallory Hall effect distributor (dummy ignition) firing MSD 6A
-WB02 - open loop
-TV71 Garrett Turbo - 76mm compressor
-50mm wastegate, 35mm BOV

Chassis:

-TH350 transmission
-Art Carr Custom Billet converter - 3800RPM stall speed
-4 Link/coil over rear suspension
-9" Ford rearend with Mosier internals
-10 pt cage
-18.5 X 33 E/T streets out back

It's a rocket to drive....lots of fun when it is running.  It is for sale once the genboard is back in it and it si running again. 

[jadzwin]

Please put some pictures especially underhood one :)
I like this project very much.

[Turbos10]

Here you go...