News:

When asking for technical help at the very least let us know the version of firmware you are running.
Cliff's Calibration (Mapping) Guide is a MUST READ: http://www.vemssupport.com/forum/index.php/topic,97.0.html

Main Menu

Which Firmware?

Started by mr_g, July 09, 2008, 12:47:38 PM

Previous topic - Next topic

mr_g

There is no staged at all or there is staged only in one config?

Did we finally get real facts, what version have what support for bifuel?
1073?
1118?
1133?
questions:
1. full double config?
2. double tables only?
3. no bifuel support?

This is something I must know before I choose firmware for bifuel... Now I have 1073 running on gasoline only...

[email protected]

None of these have support for LPG!
1.0.73 is for Missing tooth triggers e.g. 36-1, 60-2 and similar types (Renix works okay on it btw)
1.1.18 is for Non-missing tooth triggers and non-missing with sync (simple trigger+sync, 12/24+1sync)

1.1.33 is for bench testing, you may get to find peices of your engine on the floor if you run this.
I posted the following information on it in the thread: http://www.vems.co.uk/forum/index.php?topic=445.msg5779

Quote[09:28]   <PhatBob>   Will there be a dual config support on a 1.0.xx firmware release?
[09:30]   <Andrey>   dual tables, but one config
[09:33]   <Andrey>   according to storage.c it switch 3 tables: boost, ve, adv
[09:35]   <Andrey>   (ve table with lambda table too)

So you get the option of switching tables not configs with 1.1.33

Bat

Hi,
Do we have one with a working staged injector setup, or only the one the guy with the rotary engine has, please?
Cheers,
Gavin :)
VEMs Authorised Installer / Re-seller. K head kits for A series now available!

WB/EGT gauges. Click here for customers write-up 

Visit www.doyouneedabrain.co.uk

[email protected]

#3
As of 19:29BST:
This has bench tested only - and should not be used unless you understand the consequences of using pre-release firmware.

Quote from: Sambas
Available in here http://kotisivu.dnainternet.net/sakrkorh/vems/fw1.0.78x.zip
With:
* 1.1 boost code.
* TPS/boost scales directly to boostdc.
* Boostlimit switch, eg. for low gear limit.
* MAT-correction table. 
* Injector staging.
* 16x14 Tables.

Using something like this for boostswitch:


Bat

Hi,
Me likey! ;D
:-[ Could you explain/link to what the first 2 points mean, please?  :-[
Cheers,
Gavin :)
VEMs Authorised Installer / Re-seller. K head kits for A series now available!

WB/EGT gauges. Click here for customers write-up 

Visit www.doyouneedabrain.co.uk

gunni

I belive the

second item being direct Duty Cycle control works in such fashion that you simply input the desired duty cycle
so you can "design"  the boost curve.