Author Topic: Individual injector trim  (Read 6766 times)

Offline 500

  • Jr. Member
  • **
  • Posts: 15
  • BHP: 1
Individual injector trim
« on: June 25, 2008, 03:01:56 pm »
is the above possible, for say if I have a flow rate differential of 3% over 4 injectors, is it possible to adjust the opening times for injectors if using sequential firing

Just so I know weather to get mine converted or buy a new set

thanks

Adam

Offline rob@vems.co.uk

  • Hero Member
  • *****
  • Posts: 3115
  • BHP: 49
    • VEMS Forum
Re: Individual injector trim
« Reply #1 on: June 25, 2008, 10:09:43 pm »
We dont have individual cylinder trim - theres no better way to really get the fuelling badly wrong.

Offline 500

  • Jr. Member
  • **
  • Posts: 15
  • BHP: 1
Re: Individual injector trim
« Reply #2 on: June 26, 2008, 08:23:07 am »
Thats a shame  >:( looks like I will have to get some new injectors

Offline rob@vems.co.uk

  • Hero Member
  • *****
  • Posts: 3115
  • BHP: 49
    • VEMS Forum
Re: Individual injector trim
« Reply #3 on: June 27, 2008, 10:08:54 am »
Can you be sure that they will be better matched for flow though?

Offline 500

  • Jr. Member
  • **
  • Posts: 15
  • BHP: 1
Re: Individual injector trim
« Reply #4 on: June 30, 2008, 11:24:55 am »
Yes, he'll flow match the new ones that he has (circa 50) and then mod them to 1000cc

it'll cost me an extra 300 for the new injectors  :-\