Technical > Wiring & Sensors
Good Grounding
Tony C:
cheers rob, will report back with pictures tonight to see if it passes your inspection mate ;D
Will:
Is it ok to ground coilpack ignitors (Mitsubishi ones) to the same point where the ECU is grounded to?
It would enable to make my wiring alot neater and simplify my Rev counter wiring as well.
rob@vems.co.uk:
I would ground that directly to the head, and make sure that the grounding on the block is excellent.
Rob
altz1:
The pinnout shows, that there is a pin in the econseal 18 plug that needs to be grounded (pin 17), but it is not shown in this topic neither the user manual. Should I connect it to common ground?
mattias:
EC18-pin17 is connected internally to signal ground, for convenience. It's for the analog signals and RS232 communication.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version