News:

When asking for technical help at the very least let us know the version of firmware you are running.
Cliff's Calibration (Mapping) Guide is a MUST READ: http://www.vemssupport.com/forum/index.php/topic,97.0.html

Main Menu

Subaru ign output

Started by Denmark, April 16, 2008, 10:59:33 AM

Previous topic - Next topic

Denmark

Had the car started today, run right away on the legacy settings,with the ign outputs inverted and with a pullup,
Also got perfect idle, like oe, with the stepper on the difficult Impreza stepper, and it seemÃ,´s to start much better then the Legacy, i just need to open the throttle a bit and it starts right away.

I have to work some on that this following week, as i also have to install some bigger injectors, so i did not want to put a lot of work into it before they are changed.



/Skassa
working on the boxer