Technical > Wiring & Sensors

2" V Band Clamp Source?! & boost solenoid query

(1/1)

young_un1:
Hi everyone,
               
           I'm on the hunt for a 2" internal diameter V Band clamp with a 2.5" maximum radius at the outer edge of the "V" as it were. I have seen many at 2.5" internal and 3" external but none in the size I'm looking for. Has anyone any ideas where I could find one please?

I also now have a dual port actuator on my turbo and wondered what the best configuration with my VEMS boost solenoid will now be please?

Many Thanks,
                  Alan :)

rob@vems.co.uk:
Ask Pieter at DP engineering, they can get all sorts of turbo wonders:
info@dp-engineering.nl

Also give Damo a shout - his Time Attack car thread is in the project section, he's got a twin port actuator that he's running with the solenoid.

damo_S13:
for my 2 port wastegate i have used the guide here http://www.vems.hu/wiki/index.php?page=MembersPage/PhatBob/UserGuide

under Connecting A Boost Control Solenoid

see Connection option two

the presure bleed line seen there,

i have this going to the secound port but as i said im my pm i have not tried it yet as im just running off the waste gate spring at min so dont know if it will work or not

Navigation

[0] Message Index