Author Topic: DON´T LOWER IDLE.  (Read 6293 times)

Offline chencho16000

  • Jr. Member
  • **
  • Posts: 76
  • BHP: 2
  • rally driver
DON´T LOWER IDLE.
« on: April 20, 2008, 10:40:32 pm »

BY WHERE I CAN MODIFY IT?
ALWAYS AROUND 1500 REV X MIN.
THANKS.
 ??? ??? ???

Offline rob@vems.co.uk

  • Hero Member
  • *****
  • Posts: 3115
  • BHP: 49
    • VEMS Forum
Re: DON´T LOWER IDLE.
« Reply #1 on: April 21, 2008, 08:36:26 am »
The idle control is in Extras->Idle Settings General You can use the simple on/off type which is a good idea to get things moving in the right direction.

First we need to check that the Idle Control Valve is functioning correctly.  Does it have a good power feed (measuring 12V), does the idle speed drop when you ground the activation wire?

Offline chencho16000

  • Jr. Member
  • **
  • Posts: 76
  • BHP: 2
  • rally driver
Re: DON´T LOWER IDLE.
« Reply #2 on: April 21, 2008, 09:53:41 pm »
I use on/off type.
The idle control valve is functioning correctly.

When you say "is a good idea to get things moving in the right direction"...You talk about the regulating screw?

Offline rob@vems.co.uk

  • Hero Member
  • *****
  • Posts: 3115
  • BHP: 49
    • VEMS Forum
Re: DON´T LOWER IDLE.
« Reply #3 on: April 21, 2008, 10:07:34 pm »
So when you activate the ICV by grounding what does the RPM drop to?

Which pin is your ICV connected to?

What are the Idle solenoid settings in Extras->Idle Settings General and the values in Settings->Injector Outputs