News:

When asking for technical help at the very least let us know the version of firmware you are running.
Cliff's Calibration (Mapping) Guide is a MUST READ: http://www.vemssupport.com/forum/index.php/topic,97.0.html

Main Menu

SiemensDeka 630cc(and other) injector settings

Started by lugnuts, May 18, 2008, 09:22:57 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

lugnuts

May 18, 2008, 09:22:57 PM
What are the best injector settings for the 630 cc high-z injectors?
I'm using the 30v TS Diode.

Also looking for specs for Delphi 96# low-z injectors using 6R8 resistors.

Here is my Injector Specs page on the Wiki:
http://www.vems.hu/wiki/index.php?action=find&find=MembersPage%2FKevinBlack%2FInjectorSpecDatabase

I will add any information I get here to the page

Print
Go Up Pages1
User actions