internal PCB wiring

[jago]

hello, i've been looking on the wiki and the forum and i cant find an internal wiring diagram.


i am trying to murge the orignal ecu pins with the vems however i need to know where all the fets and diodes go. also what pin of the 6 i need for the map sensor.

jago

p.s. i got the ecu today

[Denmark]

Here you go,

Links to the best i have found:

http://www.vems.hu/files/genboardv3/assembly/vems_v3_documentation.pdf

http://www.vems.hu/files/MembersPage/PeterJensen/wems_hardwareinstall.doc

http://www.vems.hu/wiki/index.php?page=MembersPage%2FPhatBob%2FUserGuide


Youjust need to check that on the Peter page, some off the wiring is not the same as others!!


/Skassa

[[email protected]]

Here's my build guide:
http://www.vems.co.uk/VEMS/

And GRM Racers Step-by-step guide:
http://www.vems.hu/wiki/index.php?page=StepByStepGuide

[jago]

links are really good, except i am still none the wiser on what pin to use for offboard map sensor wiring.

i have got my ecu back from the rolling road, so i can now start to desolder the connectors and start to make a patch list of connections.

[Denmark]

ItÃ,´s shown right here..

http://www.vems.hu/files/genboardv3/assembly/vems_v3_documentation.pdf



There is a internal wire from the signal place , and to EC18- pin6


/Skassa

[jago]

i see it thank you.