is this everything i need to wire vems up

[richard s]

apart from injectors and throttle position switch i also have a selection of plugs with various lenghts of wire on them
i have just had a look through the web shop and done a list of what i think i need to wire vems up
could you all look through it and tell me if i missed anything
before the list here is a guide to what my setup will be
car is a mercedes 190 2.3 16v crank trigger will be hall sensor with 2 bolts i am using a single coil and original distributor standard inlet manifold
my list is
econoseal 18 harness/econoseal 36 harness/clt sensor/iat sensor/hall sensor/wideband 02 sensor/wb 02 sensor screw/02 connector
does this sound right or have i missed something
cheers

[rob@vems.co.uk]

That sounds about right.

[richard s]

cool cheers rob
i have just done some rough figures and for about £600 i get a ecu part made up wiring loom and all the sensors and connectors needed
bargain