« previous next »
Pages: [1]

Author Topic: Is VEMS able to control CVVT  (Read 4525 times)

Offline 200KriSX

  • Jr. Member
  • **
  • Posts: 8
  • BHP: 0
Is VEMS able to control CVVT
« on: March 26, 2008, 01:56:45 pm »
Hi,

Is VEMS able to control CVVT on inlet and exhaust? I want to convert to the Volvo B5254T engine and want to run it on VEMS :)

Thanks,

Kris :)
Logged

Offline rob@vems.co.uk

  • Hero Member
  • *****
  • Posts: 3115
  • BHP: 49
    • VEMS Forum
Re: Is VEMS able to control CVVT
« Reply #1 on: March 26, 2008, 02:28:21 pm »
It is not.  Most the the Volvo installations lock the CVVT up.
Logged

Offline 200KriSX

  • Jr. Member
  • **
  • Posts: 8
  • BHP: 0
Re: Is VEMS able to control CVVT
« Reply #2 on: March 26, 2008, 02:38:01 pm »
Oh  :'(

I take it these are controlled differently to the NVCS then?
Logged

Offline rob@vems.co.uk

  • Hero Member
  • *****
  • Posts: 3115
  • BHP: 49
    • VEMS Forum
Re: Is VEMS able to control CVVT
« Reply #3 on: March 26, 2008, 07:25:30 pm »
The early type of vvt are simple - they tend to drive only one cam and are on/off jobs.
The later type drive two cams - and are PWM controlled for fine tuning the position of the cams, VANOS and i-VTEC are examples of this.
There is work underway to make a map for cam PWMs, but theres a lot of work underway to do a lot of things...

Rob
Logged
Pages: [1]
« previous next »