Extra Input chanels

[Sprocket]

Where are the extra input chanels. how many and how can I use these, analogue? Digital?

EC36/18 pins, GenBoard hard wiring???

Again software/ Megatune.

Really I am looking for the digital input chanel for the ALS.

Rob has mentioned something about this requiring some resistors??

[dnb]

Remind me to take some pics of my VEMS - I have an extra 9 pin D connector with the extra AtoD & digital inputs already wired in.  Don't remember the details, but they come from various header pins on the board.

[Sprocket]

Reminded


Pictures would be good

Ta Mucho

[Sprocket]

Bringing this back to the top

Reminder for information

[rob@vems.co.uk]

I was hoping that the new style pin-out drawing would have been done so that it could be better illustrated.

[Sprocket]

all I could find on these inputs, Some what confusing as the Wiki seems to be . Thi info is in there some where

http://www.vems.hu/wiki/index.php?page=GenBoard%2FUnderDevelopment%2FDigitalInputs

[rob@vems.co.uk]

Sorry about the lack of response on this, I've written some wordage about the Analog inputs in the User Guide:
http://www.vems.hu/wiki/index.php?page=MembersPage%2FPhatBob%2FUserGuide
(Its near the bottom)

The wiring has been confirmed as:

The input is pulled up to 5v through the 2k7 resistor, and when the button is pressed it is pulled down to 0v