News:

When asking for technical help at the very least let us know the version of firmware you are running.
Cliff's Calibration (Mapping) Guide is a MUST READ: http://www.vemssupport.com/forum/index.php/topic,97.0.html

Main Menu

TARGET LAMBDA: 0.83

Started by chencho16000, March 12, 2008, 08:54:53 PM

Previous topic - Next topic

chencho16000

Hello!
  I have Vems 3.3 with Bosch wideband ego.
  Engine turbocharged.
  What I must make to obtain to a relation lambda of 0.83?
  Where I can obtain instructions from how to do setup? :-\

[email protected]

You need to set the lambda table to 0.83 in the areas that you want it to occur, then with that as a target you need to adjust your VE table to suit.
Can you datalog what is happening now and provide the MSQ from MegaTune and I can talk you through the fuel tuning.

Cheers

Rob