Technical > Wiring & Sensors
Bosch Motorsport Ignition Coil 3x2
gox:
this is a correct order for inline six engine and not correct for V6 engines...
inline -> 1 5 3 6 2 4
V6 -> 1 6 5 4 3 2
gox:
--- Quote from: dundersmurfen on April 10, 2009, 02:41:33 pm ---hey I actually know this one!
so for future reference...
pins 1 - 2 - 3 are ground, wire them up with igbts
pin 4 is common +12v feed
pins are placed in logical order: the left pin goes the left coil etc
not so logical is the numbering on the coil spark outputs, ignore them!
use coil 1 with pin 1, and cyl 1+6
use coil 2 with pin 2, and cyl 2+5
use coil 3 with pin 3, and cyl 3+4
--- End quote ---
correct,i connected it today,works perfect!
Navigation
[0] Message Index
[*] Previous page
Go to full version