News:

When asking for technical help at the very least let us know the version of firmware you are running.
Cliff's Calibration (Mapping) Guide is a MUST READ: http://www.vemssupport.com/forum/index.php/topic,97.0.html

Main Menu

5v output

Started by ex-ctr, March 04, 2007, 10:02:10 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

ex-ctr

March 04, 2007, 10:02:10 AM
it the a spare 5v output i could use to run some led temp sensors [topic on the sxoc] as im undertraying my car and wanted to keep an eye on diff and gearbox temps :)

[email protected]

#1
March 04, 2007, 12:14:08 PM
Pin 28 is a +5v supply.  If you use pin 29 for the TPS you shouldn't have too much 'pin crowding'

Rob
Print
Go Up Pages1
User actions