Author Topic: Audi A4 COP ground  (Read 6075 times)

Offline yanmar

  • Jr. Member
  • **
  • Posts: 21
  • BHP: 0
Audi A4 COP ground
« on: December 10, 2009, 05:25:51 am »
Hi,

I am not satisfied of my car's performance with the new upgrade and started to investigate. My thought is weak spark  :-\ .
The thing is when I rewired the harness discovered a missing ground (4a) on 3 coils. How come the car was still running with no problems? Is it possible that the coils are partly damaged?
 The timing is between 14-18deg and IAT is 42 deg max, 230kpa boost and I see too high exh.temp and the power is not what I thought it should be. There is no big difference between 180kpa and240kpa boost.
I couldn't find how to attach picture from  Megatune.

« Last Edit: December 10, 2009, 05:39:05 am by yanmar »

Offline lugnuts

  • Full Member
  • ***
  • Posts: 249
  • BHP: 2
Re: Audi A4 COP ground
« Reply #1 on: December 10, 2009, 06:29:38 am »
Which coils do you have, 4 wire or 3 wire?
The 4 wire coils have 2 grounds, so it will probably work for a short time with one ground broken.
You will make more power and lower EGT if you increase the ignition timing.

Offline yanmar

  • Jr. Member
  • **
  • Posts: 21
  • BHP: 0
Re: Audi A4 COP ground
« Reply #2 on: December 10, 2009, 01:23:26 pm »
They are 3 wires ones. I will increase the timing when I am sure all is in perfect condition and find good way to hear my knock sensors, but I read that normal is up to 20deg and it is not that far.