I set the timing to 15 degrees and through a range of adjustment had it kicking and trying to start a number of times but just won't fully fire. Kev at apex told me to just stick the CAS in at any position because i can adjust the triggering in the software to suit but this didn't work cos you can only adjust by 127 degrees.
So pulled out the CAS and did my best effort at timing the trigger to tdc and it still it kicked and did not fire properly. Went through the adjustments for trigger and tdc with no change. Its just not happening.
Should i try and time the CAS to before TDC and use the adjustment to bring things inline. The timing mark was evading me as well with all the changes we made we only saw it come close to the marker once and it dissapeared and was never to be seen again what have i done wrong.
Could the coil pack feeds be mixed up so the firing order is wrong or something else.
cheers people.