Strange lambda reading on datalog.

[Tony C]

got the car running today after Dave had to do some work on the ecu,

but noticed in the datalog,
that the lambda target is around 2.30 BUT the lambda table is at 1.00
the target seems to be  be nearly double what it should be
any ideas?
its version 1.1.44

[gunni]

Post a picture.
Of your log. or a link to the log.
Also a pic of your lambda table.

[Tony C]

Hi Gunni,
the datalog and msq are here:
http://www.capriracing.co.uk/vems/latest.zip

lambda table here:

[Tony C]

also just noticed there is no Batt v reading on the datalog either.

[Sprocket]

the later firmwares have different log files. If you use Vems log viewer, it doesnt like them. I think the log files have been changed to use Megalog viewer, and the log file you attached works fine in that environment.

[Tony C]

wheres megalog viewer mate?

[Sprocket]

http://www.ideasandsolutions.biz/MegaLogViewer/

[Tony C]

ta mate i was using vems viewer,
all seems ok on datalog now using megalog viewer.