When asking for technical help at the very least let us know the version of firmware you are running.Cliff's Calibration (Mapping) Guide is a MUST READ: http://www.vemssupport.com/forum/index.php/topic,97.0.html
There are 2 curves to change when you change the IAT calibration - one for the temperature and one to control calculating the density. Make sure you replaced both!
There are 2 curves to change when you change the IAT calibration - one for the temperature and one to control calculating the density. Make sure you replaced both!Thinking about it a bit more, if you adjust the density curve a bit, you can get some interesting fuelling effects such as automatic enrichment with increasing temperature when it gets really hot. Might be worth thinking about.
I just checked, my low density limit is set to 0, or disabled. I am sure changing this value to 70 will help on warm restarts.
Quote from: antonch on January 12, 2008, 03:22:58 amI just checked, my low density limit is set to 0, or disabled. I am sure changing this value to 70 will help on warm restarts.Did that cure your AFR on hot restarts?I´m having same kind of problem too. I changed my slow IAT sensor to faster one. Much better now.Haven´t bothered to try to change that Fake airdensity value yet.