« previous next »
Pages: [1]

Author Topic: Can you re-calibration the vems to a used wideband sensor?  (Read 5936 times)

Offline damo_S13

  • Full Member
  • ***
  • Posts: 140
  • BHP: 5
Can you re-calibration the vems to a used wideband sensor?
« on: July 04, 2008, 01:30:14 pm »
basicly i have used the Bosch LSU4 sensor i got with my vems once but then updated the softwere which means i need to re-calibrat it right?

Is it ok to do this or do i need to buy a new one?
If i need a new one any one know where i can get it from?

thanks
damo
Logged
building vems 4age with itb powered corolla

Offline rob@vems.co.uk

  • Hero Member
  • *****
  • Posts: 3115
  • BHP: 49
    • VEMS Forum
Re: Can you re-calibration the vems to a used wideband sensor?
« Reply #1 on: July 04, 2008, 01:42:50 pm »
The calibration value is for the sensor, use the old value and you'll be fine.

If you updated the software the original values should still remain.

What version did you update it to?

Rob
Logged

Offline damo_S13

  • Full Member
  • ***
  • Posts: 140
  • BHP: 5
Re: Can you re-calibration the vems to a used wideband sensor?
« Reply #2 on: July 05, 2008, 07:37:59 am »
its just from when we did it when i got the ecu i will plug in the wideband and see what value i get in free air.

thanks
rob
Logged
building vems 4age with itb powered corolla
Pages: [1]
« previous next »