« previous next »
Pages: [1]

Author Topic: Priming, Cranking setup Help  (Read 13266 times)

Offline Mark0

  • Jr. Member
  • **
  • Posts: 24
  • BHP: 0
Priming, Cranking setup Help
« on: February 25, 2017, 12:41:12 pm »
Hi, it seems that "Priming, Cranking & Afterstart Setup" help page (F1) doesn't display anything, just white screen. Noticed this in previous versions too. Right no running 1.5.46 version of VemsTune.

Not big deal, but still :O
Logged
Random VEMS user :O

Offline wersch

  • Jr. Member
  • **
  • Posts: 60
  • BHP: 1
  • ECU installer in Sweden
Re: Priming, Cranking setup Help
« Reply #1 on: February 26, 2017, 12:16:35 pm »
Update Vemstune and ini files, this is a old version.
I have 1.5.51 and there the help meny of this works.
Logged

Offline Mark0

  • Jr. Member
  • **
  • Posts: 24
  • BHP: 0
Re: Priming, Cranking setup Help
« Reply #2 on: February 26, 2017, 12:43:07 pm »
Quote from: wersch on February 26, 2017, 12:16:35 pm
Update Vemstune and ini files, this is a old version.
I have 1.5.51 and there the help meny of this works.

Thanks, will update.
Logged
Random VEMS user :O

Offline XanxusNagi

  • New Users
  • *
  • Posts: 1
  • BHP: 0
Re: Priming, Cranking setup Help
« Reply #3 on: October 03, 2017, 10:39:25 am »
Can you describe what your mesh has that causes this problem?
Logged
Pages: [1]
« previous next »