News:

When asking for technical help at the very least let us know the version of firmware you are running.
Cliff's Calibration (Mapping) Guide is a MUST READ: http://www.vemssupport.com/forum/index.php/topic,97.0.html

Main Menu

Oil cooler fan control?

Started by Rak, April 12, 2018, 09:09:19 AM

Previous topic - Next topic

Rak

I was planning to install oil temp sensor and use vems to control oil cooler fan.
Went trough vemstune and cant figure out way to control 2nd cooling fan.

Idea behind fan control is to gain control of oil temp.
V3.3 1652
FW 1.2.38

wersch

I think you would be able to use Misc.1/2 output?

Kamuto

Quote from: Rak on April 12, 2018, 09:09:19 AM
I was planning to install oil temp sensor and use vems to control oil cooler fan.
Went trough vemstune and cant figure out way to control 2nd cooling fan.

Idea behind fan control is to gain control of oil temp.
set input as radiator output temp or something, and control it from water pump output
Vems installer in Lithuania
[email protected]

Rak

Misc outputs dont have possibility to choose oil temp, only clt and mat.

Quote from: Kamuto on April 18, 2018, 09:32:03 PM
Quote from: Rak on April 12, 2018, 09:09:19 AM
I was planning to install oil temp sensor and use vems to control oil cooler fan.
Went trough vemstune and cant figure out way to control 2nd cooling fan.

Idea behind fan control is to gain control of oil temp.
set input as radiator output temp or something, and control it from water pump output

I was planning to use radiator outlet for radiator fan.  But yes, that might work.
V3.3 1652
FW 1.2.38