Config file for audi AAN 2.2

[Durr McDanks]

Hi Everyone,

I was seeing if anyone has a good closed loop boost config for a audi 2.2L AAN running a gt2871r ? I am looking for good PID numbers and a good refDC Table vs boost target to go with it. I am also running the stock N75 valve. TIA!

[Kamuto]

Hi Everyone,

I was seeing if anyone has a good closed loop boost config for a audi 2.2L AAN running a gt2871r ? I am looking for good PID numbers and a good refDC Table vs boost target to go with it. I am also running the stock N75 valve. TIA!

ref table depends on your wastegate spring size, and pid usually is  50 40 40 on my setups. 

[Durr McDanks]

I am running the 034EFI 1.9 BAR Wastegate Spring on the stock waste gate.

[Kamuto]

I am running the 034EFI 1.9 BAR Wastegate Spring on the stock waste gate.

if you have replaced 034 it with vems I would help you :D

[Durr McDanks]

Sorry, that was confusing on my part,  I am running VEMS standalone. I just copy and pasted what 034 had on the website next to the external wastegate spring. I have a 034 wastegate spring rated at 1.9 BAR.

[gunni]

Best recommendation is to go through the work of setting up the PIDs, it shouldn´t take more than a couple of hours if the fuel and ignition is mapped already.

Here is a link to some info from a little thing I wrote and a forum post from way back.


https://sway.com/8OUxAzd6f-aZyFxI?ref=Link
https://1drv.ms/b/s!Agm0wZb6As7NqrRVFZZAUpPOUEjE5g