News:

When asking for technical help at the very least let us know the version of firmware you are running.
Cliff's Calibration (Mapping) Guide is a MUST READ: http://www.vemssupport.com/forum/index.php/topic,97.0.html

Main Menu

Vems raw-52 install

Started by Big simer, January 29, 2018, 02:32:13 AM

Previous topic - Next topic

Big simer

I have a 84 rx7 gslse n want to watch my afr’s so I purchased the product . Was told by a friend I need to always be aware of my afr’s . My car comes with a 1 wire o2 sensor . I understand most of the wiring to the o2 but the other 2 wires from the gauge I’m alil unsure of . The one with the fuse (red) goes to constant battery or to ignition power? Now to the blue wire where does this one go? I’ve never installed a wideband before so I need all the help I can get. I was also told to wire in a relay to power, what’s ur thoughts?

Kamuto

Quote from: Big simer on January 29, 2018, 02:32:13 AM
I have a 84 rx7 gslse n want to watch my afr’s so I purchased the product . Was told by a friend I need to always be aware of my afr’s . My car comes with a 1 wire o2 sensor . I understand most of the wiring to the o2 but the other 2 wires from the gauge I’m alil unsure of . The one with the fuse (red) goes to constant battery or to ignition power? Now to the blue wire where does this one go? I’ve never installed a wideband before so I need all the help I can get. I was also told to wire in a relay to power, what’s ur thoughts?
you bought just gauge, or wideband and egt controller in the gauge?
Vems installer in Lithuania
[email protected]

gunni

Quote from: Big simer on January 29, 2018, 02:32:13 AM
I have a 84 rx7 gslse n want to watch my afr’s so I purchased the product . Was told by a friend I need to always be aware of my afr’s . My car comes with a 1 wire o2 sensor . I understand most of the wiring to the o2 but the other 2 wires from the gauge I’m alil unsure of . The one with the fuse (red) goes to constant battery or to ignition power? Now to the blue wire where does this one go? I’ve never installed a wideband before so I need all the help I can get. I was also told to wire in a relay to power, what’s ur thoughts?

The blue is ground
the fused goes to a switched 12v source.

Didn´t you get the paperwork in your box which details all of this?