Looking for BMW M52 2.8 Tune

[e30sforlife]

Looking for M52B28 Fuel Maps, Ignition Maps, and Target Lambda Tables.
Working vanos settings would be great too.
I'm using the pink 21lb injectors that come stock on these motors at stock fuel pressure (3.5bar) and also am running 91 Octane Fuel.
If anyone has a solid config with these maps or anything I can start with, That would be terrific!

Thanks

[MWfire]

I did few m52tub25 and m50b28.

[jrussell]

Is this for a USDM engine with one of our plug-in ecus? If so, I have maps that are perfect for a 100% stock engine with 93 (R+M) /2 octane. It doesn't start perfect in - 20° weather but it did start. Hopefully you don't have that horrible weather like I do.

[jrussell]

If it works for you, here's the config. It will require you to lower the timing for your fuel.

http://downloads.vems.com/configs/m52_93octane_base_config.vemscfg

[e30sforlife]

Is this for a USDM engine with one of our plug-in ecus? If so, I have maps that are perfect for a 100% stock engine with 93 (R+M) /2 octane. It doesn't start perfect in - 20° weather but it did start. Hopefully you don't have that horrible weather like I do.

Yeah Its the US Iron M52B28. unfortunately I only have 91 Octane here in California which sucks but ill gladly download those maps to start off before I get a full dyno tune!