« previous next »
Pages: [1]

Author Topic: water temp sensor replacement  (Read 7065 times)

Offline ex-ctr

  • Jr. Member
  • **
  • Posts: 35
  • BHP: 1
water temp sensor replacement
« on: February 09, 2007, 05:32:02 pm »
got to get a replacement for my nissan one so is there a better one to get, more suited to the vems :)
Logged

Offline rob@vems.co.uk

  • Hero Member
  • *****
  • Posts: 3115
  • BHP: 49
    • VEMS Forum
Re: water temp sensor replacement
« Reply #1 on: February 09, 2007, 06:34:39 pm »
We've used the water temp sensor from a Nissan S13 on a VEMS.  Most sensors are pretty much the same, (mostly made by Mitsubishi) all we really need to know is its resistance at 25degC and I can match it to a sensor curve.  Alternatively pull the sensor out, and leave it next to the air temp sensor you have then measure the resistance of them both and let me know the two readings.

Rob
Logged

Offline ex-ctr

  • Jr. Member
  • **
  • Posts: 35
  • BHP: 1
Re: water temp sensor replacement
« Reply #2 on: February 09, 2007, 08:13:42 pm »
next question is could you point me in the direction of a good DIGITAL MULTIMETER :)
Logged
Pages: [1]
« previous next »