Drive by wire: throttle moving by ECU

Welcome to VEMS Community Forum.
Log in
Sign up

March 12, 2025, 09:40:39 PM

News:

When asking for technical help at the very least let us know the version of firmware you are running.
Cliff's Calibration (Mapping) Guide is a MUST READ: http://www.vemssupport.com/forum/index.php/topic,97.0.html

Main Menu

Home
Search

Drive by wire: throttle moving by ECU

Started by mr_g, December 02, 2007, 07:07:55 PM

Previous topic - Next topic

Go Down Pages1

User actions

mr_g

Full Member
Posts: 205
Location: Croatia, Zagreb
Logged

Drive by wire: throttle moving by ECU

December 02, 2007, 07:07:55 PM

All new engines have drive by wire, throttle moving by ECU...

Is this supported or will be? This is interesting if I switch to ITB's and put some stepper on them... ;)

Astra coupe bertone R (forged C20LET/twinscroll S257sx-e/Catcams/VEMS bifuel/canbus going 35psi)
ex. Daewoo Lanos ST 2.0 16V 480HP/580Nm (forged C20LET/F23WR/WISECO/COMETIC/ARP/MRT/HELIX/GARRET GT3071R/ID1000/VEMS bifuel, 29psi)

Go Up Pages1

User actions