When asking for technical help at the very least let us know the version of firmware you are running.Cliff's Calibration (Mapping) Guide is a MUST READ: http://www.vemssupport.com/forum/index.php/topic,97.0.html
Gents, I upgraded from siemens 630s to ID1050xs, they are however giving me quite a bit of grief. I am getting a real rich condition condition under boost and also under quick throttle blips. Attached are the two files as well as some logs. Got it running enough to pull some logs. Thanks all in advance.https://drive.google.com/drive/folders/0B5j_BrqO6kEeN2t5VVRES0IycjQ?usp=sharing
Quote from: Smee on November 02, 2017, 04:10:19 amGents, I upgraded from siemens 630s to ID1050xs, they are however giving me quite a bit of grief. I am getting a real rich condition condition under boost and also under quick throttle blips. Attached are the two files as well as some logs. Got it running enough to pull some logs. Thanks all in advance.https://drive.google.com/drive/folders/0B5j_BrqO6kEeN2t5VVRES0IycjQ?usp=sharingso what's wrong here?
Quote from: Kamuto on November 02, 2017, 05:55:34 pmQuote from: Smee on November 02, 2017, 04:10:19 amGents, I upgraded from siemens 630s to ID1050xs, they are however giving me quite a bit of grief. I am getting a real rich condition condition under boost and also under quick throttle blips. Attached are the two files as well as some logs. Got it running enough to pull some logs. Thanks all in advance.https://drive.google.com/drive/folders/0B5j_BrqO6kEeN2t5VVRES0IycjQ?usp=sharingso what's wrong here?For whatever reason, it goes real rich at throttle tip in, so essentially of I blip the throttle on down shifts (sqs trans) it goes to 10 afr and then it settles where it is supposed to.