Injector Upgrade tunning issues

[Smee]

Gents, I upgraded from siemens 630s to ID1050xs, they are however giving me quite a bit of grief. I am getting a real rich condition condition under boost and also under quick throttle blips. Attached are the two files as well as some logs. Got it running enough to pull some logs. Thanks all in advance.

https://drive.google.com/drive/folders/0B5j_BrqO6kEeN2t5VVRES0IycjQ?usp=sharing

[Kamuto]

Gents, I upgraded from siemens 630s to ID1050xs, they are however giving me quite a bit of grief. I am getting a real rich condition condition under boost and also under quick throttle blips. Attached are the two files as well as some logs. Got it running enough to pull some logs. Thanks all in advance.

https://drive.google.com/drive/folders/0B5j_BrqO6kEeN2t5VVRES0IycjQ?usp=sharing

so what's wrong here?

[Smee]

Gents, I upgraded from siemens 630s to ID1050xs, they are however giving me quite a bit of grief. I am getting a real rich condition condition under boost and also under quick throttle blips. Attached are the two files as well as some logs. Got it running enough to pull some logs. Thanks all in advance.

https://drive.google.com/drive/folders/0B5j_BrqO6kEeN2t5VVRES0IycjQ?usp=sharing

so what's wrong here?

For whatever reason, it goes real rich at throttle tip in, so essentially of I blip the throttle on down shifts (sqs trans) it goes to 10 afr and then it settles where it is supposed to.

[Kamuto]

Gents, I upgraded from siemens 630s to ID1050xs, they are however giving me quite a bit of grief. I am getting a real rich condition condition under boost and also under quick throttle blips. Attached are the two files as well as some logs. Got it running enough to pull some logs. Thanks all in advance.

https://drive.google.com/drive/folders/0B5j_BrqO6kEeN2t5VVRES0IycjQ?usp=sharing

so what's wrong here?

For whatever reason, it goes real rich at throttle tip in, so essentially of I blip the throttle on down shifts (sqs trans) it goes to 10 afr and then it settles where it is supposed to.

so maybe it needs some tuning?

[utkuselamoglu]

I can help you,  post your latest configuration