Author Topic: Were to get oe ecu plugs?  (Read 5248 times)

Offline Denmark

  • Hero Member
  • *****
  • Posts: 542
  • BHP: 7
Were to get oe ecu plugs?
« on: November 24, 2007, 07:19:48 pm »
Hi All,

I´m going to make a adaptor to make a Impreza plugin ,as it seems that Rob is gone dead in the project  ;)

so were can i get the ecu plugs so i can make a adaptor harness.

I allready got one for the early model, as i hacked up a legacy ej22 ecu, that i got ,that is the same 4plug ecu as the legacy turbo, and early wrx( i think)

But i need a hole bunch of them , so i can start installing them in danish impreza´s, instead of the Link ecu i use now(with really bad idle control)

Or rob are you allready done?. ;)



/Skassa

 
working on the boxer

Offline dnb

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 837
  • BHP: 19
Re: Were to get oe ecu plugs?
« Reply #1 on: November 24, 2007, 08:44:31 pm »
Rob's not doing this one - I am.   But I'm not going to get time to test & build more until Christmas now.

Offline Denmark

  • Hero Member
  • *****
  • Posts: 542
  • BHP: 7
Re: Were to get oe ecu plugs?
« Reply #2 on: November 24, 2007, 09:03:00 pm »
Okay,

I just thought it was Rob :-[

Were can i get the the ECu plugs?, do you know?
As i dont think it can be a great buisness to hake up old ecu´s


/Skassa
working on the boxer

Offline rob@vems.co.uk

  • Hero Member
  • *****
  • Posts: 3115
  • BHP: 49
    • VEMS Forum
Re: Were to get oe ecu plugs?
« Reply #3 on: November 25, 2007, 08:50:00 am »
Rob is dead on the project???

I have a load of Subaru plugs on order from my supplier, but the lead time on the order is TEN WEEKS!
Good job that I ordered a batch load 8 weeks ago then ;D although now that you've been so rude about me you'll not be allowed to have any;)

There are a bunch of people going to be workin on this project, dnb, GintsK, me and yourself.

Rob

Offline Denmark

  • Hero Member
  • *****
  • Posts: 542
  • BHP: 7
Re: Were to get oe ecu plugs?
« Reply #4 on: November 26, 2007, 11:59:01 am »
 ;D

Great Rob,

Is it the 4plug or 3plug version , you have on order ?

I will go ahead soon to make a adaptor for the 4plug version to a legacy turbo , but the only part that´s different from the impreza is a waterpump drive for the chargecooler


/Skassa


« Last Edit: November 27, 2007, 06:56:03 am by Denmark »
working on the boxer

Offline rob@vems.co.uk

  • Hero Member
  • *****
  • Posts: 3115
  • BHP: 49
    • VEMS Forum
Re: Were to get oe ecu plugs?
« Reply #5 on: November 26, 2007, 01:25:59 pm »
4 plug version.  The 3 plug one fits the Toyota 3S-GTE engines but they had an MOQ of 160units, and I can't afford to tie-up money in more connectors, I have such a large pile of Nissan ones already  ::)

Offline Denmark

  • Hero Member
  • *****
  • Posts: 542
  • BHP: 7
Re: Were to get oe ecu plugs?
« Reply #6 on: November 27, 2007, 07:00:00 am »
I can easy understand that you are not going to buy 160 impreza set..

Why don´t you just sell some Vems ECu for the nissan buys then :)

Are we sure that the vems can run the strange oe trigger from the Subaru?


/Skassa
working on the boxer

Offline rob@vems.co.uk

  • Hero Member
  • *****
  • Posts: 3115
  • BHP: 49
    • VEMS Forum
Re: Were to get oe ecu plugs?
« Reply #7 on: November 27, 2007, 08:21:31 am »
Believe it or not I am trying to sell VEMS to the Nissan people, why dont you sell some ;)

The Subaru trigger works with the new firmware, there are engines running with it ;D

Offline Denmark

  • Hero Member
  • *****
  • Posts: 542
  • BHP: 7
Re: Were to get oe ecu plugs?
« Reply #8 on: November 27, 2007, 08:41:18 am »
I will give it a go on the Nissan forums here in Dk,
But i think that there is under 15 of the 200sx here in Denmark, so not much potentiel,

That is probbely around the same as there are Impreza´s, but there i have already sold and mapped 6pcs linkecu´s!.

I would really like the trigger setting for the Impreza!, and what firmware is being used?

/Skassa
working on the boxer