Impreza loom adaptor

[dnb]

Thanks to Rob I now have most of the parts I need for my prototype Impreza loom adaptor.
This will be built over the next week or so.

I have had an idea regarding a production version...  It also has potential applications in other areas, provided the costs come out OK.

We take a VEMS case extrusion and chop it into 3 (or 4) pieces so that we have 3 smaller cases.  Take some standard end plates, some PCB mount EC connectors that mate with the VEMS connectors and then the Subaru ECU connector.  Make a PCB where these all fit, containing the transient diode and resistor packs and you have a very neat robust P&P solution... :)

[hackish]

dnb did you get the subaru to run on VEMS? I've looked at the plug and play type things for a while now and I'm convinced that the best solution is to make a conversion harness so additional wires will be easily accessible.

-Michael

[dnb]

Not finished yet.  I'm currently gearboxless in the Subaru! 

[irishtwincam]

Will you be using stock Crank angle sensor as a primary trigger?

[dnb]

Yes.  Provided the code mods work as expected. 

[irishtwincam]

:D

Cool.

What type of trigger does the Subaru use?
24+1, 24+4 ???

[dnb]

Subaru trigger is weird.  It has 6 uneven teeth on the crank and 1, 2 or 3 pulses at 90 degree intervals on the cam.  It seems to work for Subaru but is a headache for the rest of us!