News:

When asking for technical help at the very least let us know the version of firmware you are running.
Cliff's Calibration (Mapping) Guide is a MUST READ: http://www.vemssupport.com/forum/index.php/topic,97.0.html

Main Menu

Device serial number disapiered

Started by vsc, August 17, 2017, 10:05:45 PM

Previous topic - Next topic

vsc

device stays in boot mode and I can not upload firmware or anything? any sugestions?

vsc

Board is new, car was running couple hours then desided to change fw from 1.2.31 to 1.2.38 car started idled for minute or two and then stalled tried to start couple times and then the boot mode poped out and no serial number

Kamuto

Quote from: vsc on August 17, 2017, 10:16:55 PM
Board is new, car was running couple hours then desided to change fw from 1.2.31 to 1.2.38 car started idled for minute or two and then stalled tried to start couple times and then the boot mode poped out and no serial number
seems your wiring is bit fucked up :) you can always ask for a new bootloader and then reinstall fw. but usually that happens from bad wiring or something
Vems installer in Lithuania
[email protected]

vsc

#3
Wiring is ok conected other vems car now runing.How is it done? The request for new bootloader?

Kamuto

Quote from: vsc on August 18, 2017, 06:20:55 AM
Wiring is ok conected other vems car now runing.How is it done? The request for new bootloader?
best would be to fill wiki page for that, explaining situation, will get instructions there.
Vems installer in Lithuania
[email protected]