News:

When asking for technical help at the very least let us know the version of firmware you are running.
Cliff's Calibration (Mapping) Guide is a MUST READ: http://www.vemssupport.com/forum/index.php/topic,97.0.html

Main Menu

No start- erratic crank signal

Started by sacrifice, September 06, 2017, 02:31:40 PM

Previous topic - Next topic

sacrifice

Hey guys,

So Ive swapped a volvo t5 motor into my e36. Got vems all wired up but I have ano start condition. Injectors click and fire as they should. I only have spark at immediate cranking and right at the end of cranking as I turn the key off. RPM signal is all over the map, which would cause the erratic spark. Right nos I do not have the computer we are using to tune in front of me but I will grab firmware version asap. Attached I have my config and a log of cranking.

OEM volvo coils
Factory VR crank sensor
Factory hall cam sensor
15th tooth is cylinder 1 TDC.

No idea how to attach the config and logs. If someone could help that would be great or I can email them.

wersch

Upload a image of the triggerlog as a image.
Your problem might be the crank sensor, as it is a known problem on these machines.


Kamuto

tools/record trigger log, that would help a lot
Vems installer in Lithuania
[email protected]