Author Topic: VEMS As Delivered Configuration  (Read 4156 times)

Offline gdt

  • Jr. Member
  • **
  • Posts: 2
  • BHP: 0
VEMS As Delivered Configuration
« on: June 28, 2017, 01:41:14 pm »
HI New to the Site, so bare with me...

I have a VEMS (lugtronic) that I purchased used. It's up and running just fine, i am interested in some of the features of the new firmware most notably adding the second wheelspeed sensor and i am not really sure what configuration/ options my ECU already has...

I read somewhere that i could send my ECU Serial number to somebody/place and i could be supplied a "buildsheet" so to speak....

Is this the case?

If so , what's the process for this?

Any help would be appreciated.

« Last Edit: June 28, 2017, 11:24:21 pm by gdt »

Offline RazOn

  • Jr. Member
  • **
  • Posts: 53
  • BHP: 0
Re: VEMS As Delivered Configuration
« Reply #1 on: July 10, 2017, 05:39:55 pm »
I sent vems an email with the serial number and they replied with a quick configuration list.
It's not a show stopper though... just try and see if it works.
You need to know your board rev # to know where you would connect.