Frequent max lean on decel with CEL (vems)

[smurfinator]

I have been playing with overrun fuel cut and resume and they seem to make no difference, also I cannot discover any rhyme or reason to why decel is sometimes 1.05 or 1.73+++.  I have warning light hooked up so I can pass emissions and the light is always turning on for max lean - as well is turns on for 30 seconds on startup, which could fail my emissions test.  Can i turn the lean feature off?

[smurfinator]

Can I edit config manually to increase the lean threshold for CEL or disable CEL while oxygen sensor is warming up?

[thatgearheadmarek]

smurfinator, did you ever figure this out? I too have to do emissions and it won't pass if the CEL comes on every time they let off the gas. VemsHelp says to change 1.73 to a really high number to turn it off. I tried that and it doesn't work.

[GintsK]

smurfinator, did you ever figure this out? I too have to do emissions and it won't pass if the CEL comes on every time they let off the gas. VemsHelp says to change 1.73 to a really high number to turn it off. I tried that and it doesn't work.

F1 help describes it in not most plain English. Just rise MAP margin. Margin relates just to couple values, not all.