Author Topic: How can I log Lambda No2?  (Read 7567 times)

Offline Sprocket

  • Hero Member
  • *****
  • Posts: 867
  • BHP: 29
How can I log Lambda No2?
« on: October 31, 2007, 06:42:39 pm »
I have fitted the second Wideband lambda sensor, so i now have one sensor in each downpipe. All I need is to be able to log the data on this second lambda sensor.

Where can i start, or am i chasing my tail :-\

Would be nice to have an LCD page that shows the two EGT and the two Lambda sensor data together, but is it has to be a log for now, it will have to do.

What about a Gauge in Megatune for it?

Offline rob@vems.co.uk

  • Hero Member
  • *****
  • Posts: 3115
  • BHP: 49
    • VEMS Forum
Re: How can I log Lambda No2?
« Reply #1 on: October 31, 2007, 07:48:07 pm »
There is no second wideband control.

Offline Sprocket

  • Hero Member
  • *****
  • Posts: 867
  • BHP: 29
Re: How can I log Lambda No2?
« Reply #2 on: October 31, 2007, 09:45:27 pm »
Im not after control just data

Offline rob@vems.co.uk

  • Hero Member
  • *****
  • Posts: 3115
  • BHP: 49
    • VEMS Forum
Re: How can I log Lambda No2?
« Reply #3 on: October 31, 2007, 09:58:57 pm »
The sensor needs to be controlled in order to give data I'm afraid.